1) Working with DC 24V±10%/2A power supply, working current <300mA;
2) Split control 1 to 4 doors, 1 to 4 way open button (fire) input, 1 to 4 circuit lock control output;
3) IC, CPU, ID card read and write time: ≤0.2S;
4) Networking: RS-485 or tcp/ip,
5) It can manage 1 million cards, 40,000 single door records, and 10,000 black lists for single doors. The records are not lost for 50 years.
System equipment installation and commissioning
Precautions
1. The access control system is connected by RS-485 or tcp/ip communication.
2. Between the access controller and the access control reader: a 5-core shielded RVVP cable is used.
3, pipeline laying attention to the following points:
The A power cord and the signal cable (referring to the network cable) should be respectively piped, and the distance between the two pipes should be more than 30 cm apart when they are arranged in parallel;
B must be marked when threading. The connector of the wire must be placed in the junction box and required to be welded. If this work is neglected, it will cause great trouble for future installation and commissioning work.
Debugging step
1 Set the machine number. Note : The access control numbers cannot be repeated.
2 According to the electric lock situation, the output is connected to the normally open or normally closed control terminal.
3 This machine uses RS-485 or tcp/ip communication mode.
4 When the access controller is farthest from the computer, the terminal resistance jumper must be connected, and the mid-range machine does not need to be set.
5 Turn on the power and the indicator light flashes green.
6Press the door open button or swipe the card, the buzzer will beep and unlock. If "dudu..." rings, it means the card permissions are wrong.
7 Press the door open button to unlock, it should be automatically closed after a few seconds (the door opening time can be set by software).
8 Use software to set the operation of the access control and computer communication port, the number of access control, download time and other operations (see the access control management software).
9 Use the management card to activate the card on each access control machine, and then you can open the door by swiping the user card.
Our electric triccyle, we do three colors: black, red, and blue.The motor is able to do 650W,800W,1000W and 1200w.We can to the battery in 48V and 60V. Our cargo box size is 1.0 X 0.95 and 1.5 x 0.95 m. Our electric tricycles are good prices to be suitable to aisa,middle east and south america market.
Electric Tricycle,Electric 3-Wheeler,Electric Cargo Trike,Battery Tricycle
JIANGMEN CHANGHUA GROUP CO., LTD. , https://www.changhuagroup-motor.com