KCB Series Magnetic Stainless Steel Gear Oil Pump

KCB series Magnetic Stainless Steel Gear Oil Pump

 

 

Product Description

Brief introduction                                  

 

KCB series magnetic stainless steel gear oil pump

is mainly composed of gears, axles, pump body, pump cover,safety valve, and axle-end etc. seal.Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve.In all parts of the lubrication pump are pump work automatically to achieve using the output media

 

KCB series magnetic stainless steel gear oil pump

is applicable to transport not containing solid particles and fibers, non-corrosive, temperature is not higher than 200 ºC, the viscosity for 5 x 10-6 ~ 1.5 x 103 m2 / s (5~1500 CST) lubricating oil or other similar properties of lubricating oil liquid.

 

Application scope                                  

 

1. Medicine industry

2. Fine chemical industry

3. Food industry

4. Cosmetics industry

5. Printing and dyeing industry

6. Brewing industry

 

1. KCB series magnetic stainless steel gear oil pump is mainly gear oil pump gear, shaft, pump body, valve, shaft end seal of. Gear after heat treatment have higher hardness and strength, and with the shaft installed in the replaceable sleeve inside operation. All the parts in the pump will automatic reach lubrication by output medium when pump working.

2. In pump with design reasonable drainage and return chute, making gear in the work under the minimum torque force,so bearing load is small, little wear and tear, pump with high efficiency.






 

KCB series Magnetic Stainless Steel Gear Oil Pump

 

 

Product Description

Brief introduction                                  

 

KCB series magnetic stainless steel gear oil pump

is mainly composed of gears, axles, pump body, pump cover,safety valve, and axle-end etc. seal.Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve.In all parts of the lubrication pump are pump work automatically to achieve using the output media

 

KCB series magnetic stainless steel gear oil pump

is applicable to transport not containing solid particles and fibers, non-corrosive, temperature is not higher than 200 ºC, the viscosity for 5 x 10-6 ~ 1.5 x 103 m2 / s (5~1500 CST) lubricating oil or other similar properties of lubricating oil liquid.

 

Application scope                                  

 

1. Medicine industry

2. Fine chemical industry

3. Food industry

4. Cosmetics industry

5. Printing and dyeing industry

6. Brewing industry

 

1. KCB series magnetic stainless steel gear oil pump is mainly gear oil pump gear, shaft, pump body, valve, shaft end seal of. Gear after heat treatment have higher hardness and strength, and with the shaft installed in the replaceable sleeve inside operation. All the parts in the pump will automatic reach lubrication by output medium when pump working.

2. In pump with design reasonable drainage and return chute, making gear in the work under the minimum torque force,so bearing load is small, little wear and tear, pump with high efficiency.






 

Phosphorus Pentasulfide

In addition to its industrial uses, phosphorus pentasulfide has also been used in the laboratory for the synthesis of various organic compounds, including thioesters, thioamides, and thioethers. It is typically used as a reagent in these reactions, as it can convert carboxylic acids and other functional groups into their corresponding thio derivatives.

Phosphorus pentasulfide (P2S5) is a chemical compound composed of two phosphorus atoms and five sulfur atoms. It is a yellowish-green solid that is insoluble in water but soluble in most organic solvents.

Phosphorus pentasulfide is commonly used in organic synthesis as a reagent for the conversion of alcohols to thiols and thioesters. It is also used in the production of insecticides, fungicides, and herbicides.

Phosphorus pentasulfide is a highly reactive and flammable compound that can pose a significant health hazard if not handled properly. It can cause severe irritation to the eyes, skin, and respiratory system, and is considered a potential carcinogen. Proper protective equipment, such as gloves and goggles, should be worn when handling this compound.

Phosphorus pentasulfide (P2S5) is a highly reactive and dangerous chemical compound that is commonly used in the production of pesticides, lubricants, and other industrial chemicals. It is a yellowish solid that can be easily ignited and releases toxic fumes when exposed to air or water.

Exposure to phosphorus pentasulfide can cause severe respiratory and skin irritation, as well as eye damage. Inhalation of the fumes can lead to coughing, wheezing, and shortness of breath, while skin contact can cause burns, blisters, and chemical burns.

Phosphorus pentasulfide is also highly flammable and can ignite spontaneously when exposed to air or moisture. It reacts violently with water, releasing toxic hydrogen sulfide gas, which can cause respiratory failure and even death.

Due to its highly reactive nature and potential health hazards, phosphorus pentasulfide should only be handled by trained professionals in a controlled environment with appropriate safety measures in place.

Chemical Phosphorus pentasulfide with CAS 1314-80-3,Phosphorus Pentasulfide Cas 1314-80-3,Phosphorus Pentasulfide Hazardous Chemical,Dangerous Chemical Phosphoric Sulfide

Sichuan Jinhe Qihang Co,. Ltd. , https://www.jqfoodadditives.com