Located in the northern foot of the Tianshan Mountains and the southeastern margin of the Junggar Basin, a coal mine group has taken root in the Changji Hui Autonomous Prefecture of Xinjiang since 2009. “Resource-saving, environment-friendly, technology-driven industrial upgrading†is its unchanging production model and idea.
Located in the north of the Tianshan Mountains and a coal mine group on the southeastern edge of the Junggar Basin
Mo coal is the main production business of the company. During the year, the winds and winds continue, workers and equipment have been subjected to wind and sand ash for a long time, and the harsh working environment, running almost 24 hours a day, the loader used in the mining area is extremely depleted, and many equipment are close to more than a year. scrapped. To this end, Ma Baowen, who is responsible for production management, has been under tremendous pressure.
Bad working conditions
In 2014, it was a turning point for the company's leapfrog development. According to the company's strategy, in the next few years, the output will be greatly increased from the previous 1.5 million to 6.5 million tons, but for the old loader that is not suitable for use, this is almost impossible task, so Changing the brand became the only choice for Ma Baowen.
Ma Baowen, General Manager
"Some people have proposed to change imports, but I think domestic brands are definitely good." With more than ten years of industry experience and confidence in China's national industry, Ma Baowen insists on recommending domestic brands with excellent performance. After in-depth research and comparison tests, this time he identified Liugong and introduced 13 Liugong CLG856H loaders at one time.
Introduced 13 Liugong CLG856H loaders at one time
As a fist product of Liugong, the CLG856H loader has a series of advantages such as strong power, high efficiency, energy saving, durability and reliability, safety and comfort, and convenient maintenance. After the coal mine has been in use for more than three years, they have not met the heavy expectations and successfully withstood the severe The test of the working environment has become the main equipment for production in the mining area.
"It has been used here for three years, which is equivalent to five or six years in other places! And there have been no major problems until now. Therefore, Liugong has been talking about extreme conditions and forcing equipment, which seems to me to be quite reliable. Spectrum." For the performance of CLG856H, Ma Baowen gave his evaluation.
After the Liugong CLG856H was put into use, the general feedback of the machine users was strong and the control was easy. Because the material density of the coal was not high, the standard 3-way bucket was just starting to use a little overkill, and the maximum performance of the machine could not be exerted. The improvement of the bucket was put on the agenda, and Liugong also quickly joined in.
Improvement on the bucket
From in-depth research and measurement, to product design, to production, and finally shipping and assembly, in less than a month, Liugong fully commissioned the 5-party bucket tailored for the mine.
Tailored 5-party bucket is fully operational
"In the past, I used a three-way bucket to fill a car for ten minutes. Now I am replaced with a five-party bucket. I can load a car in five or six minutes. The maximum output can reach 3,670 tons per day, which is doubled. "The durability of the equipment has been qualitatively leap, and the work efficiency has also been greatly improved, which makes Ma Baowen feel surprised.
The CLG856H loader is equipped with a micro-charged cab. It can only get a little dust when the driver opens the door. At other times, it can basically avoid dust and noise. “In the past, when the driver worked for a day, only the teeth were white, and the body was all black. Now the problem is completely solved.â€
The good airtightness of the cab also saves another cost in the mine – labor insurance supplies. After switching to the Liugong 856H loader, the dust mask consumption of more than 40 drivers was reduced by 80%, and the company saved about 100,000 yuan per year.
Jointly write a new chapter of sustainable development
In this desert of black gold, the golden steel giants wielded powerful arms and witnessed the pursuit of quality work and energy efficiency by the two companies, and together they wrote a new chapter of sustainable development!
This article belongs to China Construction Machinery Trade Network () original, if you need to reprint, you must indicate the source in the form of a hyperlink, it is strictly forbidden to modify any original text.
Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories are less expensive than other manufacturing processes.
Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories have good thermal properties and are used in applications where high temperature power supplies and bulbs are used. In former years, lighting housings were welded together, which was labor intensive, costly, and had limitations on the shapes available.
Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories can be many shapes and sizes, used in many lighting applications, and can be manufactured net shape. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight. Aluminum lighting fixtures can be produced in quantities of a few hundred to thousands of aluminum lighting fixtures each day. Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories are electrically conductive and can be grounded.
Aluminum Die Casting Lighting Parts
Aluminum Die Casting of Lighting Parts, Aluminum Die Casting of Lamp parts, Aluminum Castings of LED, Aluminum Casting of CNC Machining
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com