Peel force testing machine daily maintenance

Peel force testing machine for peeling of food plastic packaging, daily cosmetics plastic packaging, adhesives, adhesive tapes, stickers, medical patches, protective films, composite films, artificial leather, woven bags, films, paper and other related products. Pull off performance tests, can be used for food packaging QS certification with professional equipment.

KJ-1067 High-Low Temperature Peel Tester

In the process of using the testing machine, pay attention to the operation specification and maintenance and maintenance of the machine at the same time. This can effectively extend the service life of the machine and make the machine play a greater role in our product testing. Here, the Kejian detection instrument provides detailed information on the maintenance of the peeling force tester. The following points should be observed when performing maintenance:

a) Perform an average of 2-3 cleansings of the peel force tester per month;

b) The buffer oil of the peeling force tester shall be kept clean, and the oil level shall be replaced immediately when the oil level is less than two-thirds of the depth of the peel strength test barrel;

c) Before starting the peeling force tester, check whether the frictional active parts of the peeling force tester should be filled with lubricating oil;

d) Before testing, it must be ensured that the peeling force tester system is warmed up for more than 20 minutes, so that the temperature drift of the peeling force tester is minimal;

e) Before the stripping force tester is used to hold the test piece, the brake handle of the peeling force tester must be stuck, and then the test piece must be released and released;

f) The dynamometer main bearing must not be refueled. The surface of the friction wheel in the gearbox of the peeling force tester shall not be oiled or splashed with oil. The friction surface of the peeling force tester shall be absolutely clean and shall not be violently impacted by the bevel block on the arm of the peeling force tester.

g) After the test is completed, after the power is turned off, the peeling force tester is used to clean the surface and protect it in time.

Povidone Iodine

Povidone Iodine (PVP-I), also known as iodopovidone, is an antiseptic used for skin disinfection before and after surgery.It may be used both to disinfect the hands of healthcare providers and the skin of the person they are caring for.Povidone-iodine Powder may also be used for minor wounds.It may be applied to the skin as a Titanium Dioxide liquid Pharmaceutical Product or a powder.

Side effects include skin irritation and sometimes swelling.If used on large wounds, kidney Pvc Resin problems, high blood sodium, and metabolic acidosis may occur.It is not recommended in women who are less than 32 weeks pregnant or are taking lithium.Frequent use is not recommended in people with thyroid problems.Povidone Iodine Pvp is a chemical complex of povidone, hydrogen iodide, and elemental iodine.It contains 10% Povidone, with total iodine species equaling 10,000 ppm or 1% total titratable iodine.It works by releasing iodine which results in the death of a range of microorganisms.

Povidone Iodine Powder came into commercial use in 1955.It is on the World Health Organization's List of Essential Medicines.Povidone Iodine Pharmaceutical Grade is available over the counter.Povidone Iodine Powder Pharmaceutical is sold under a number of brand names including Betadine.

Povidone Iodine Pvp,Povidone Iodine Powder,Povidone Iodine Pharmaceutical Grade,Povidone Iodine Powder Pharmaceutical,Povidone-iodine Powder

HENAN LIHAO CHEM PLANT LIMITED , https://www.lihaoche.com

Posted on