Advantages of electromagnetic flowmeter and electromagnetic water meter and different installation environments

Electromagnetic Flowmeter

Electromagnetic flowmeter is a kind of velocity meter that measures the volume flow of conductive medium. It is a kind of flowmeter commonly used in industrial fields such as metallurgy, papermaking, drainage and sewage treatment. Compared with other flowmeters, it has obvious advantages, and the electromagnetic water meter is designed for the water industry to meet the urban water supply to ensure accurate water fee calculation. It is mainly used to measure the volumetric flow of conductive liquid in closed pipelines. The external installation environment has certain requirements and is widely used in places where there is no power supply on site, such as raw water, water supply, sewage treatment, water conservancy engineering and other industries. The specific requirements are as follows:

1. The split type electromagnetic flowmeter should be installed in places where the temperature changes greatly or is subject to high temperature radiation from the equipment. If it must be installed, it must be insulated and ventilated.

2. The flowmeter should be installed indoors. If it must be installed outdoors, it should avoid rainwater pouring, flooding and sun exposure, and must have moisture and sun protection measures.

3, the flow meter should be avoided in the environment containing corrosive gases, must be installed, there must be ventilation measures.

4. In order to facilitate installation, maintenance and maintenance, there must be sufficient installation space around the flowmeter.

5, the flowmeter installation site should avoid magnetic field and strong vibration source, such as the pipe vibration is large, there should be fixed pipe support on both sides of the flowmeter.

Main advantages:

1. It is suitable for measuring liquid-solid two-phase fluids containing solid particles or fibers, such as pulp, coal water slurry, slurry, mud and sewage.

2. The volumetric flow measured by the electromagnetic flowmeter is virtually unaffected by fluid density, viscosity, temperature, pressure and conductivity.

3, easy to choose the material of the fluid contact parts, can be applied to corrosive fluids.

4. The requirements for the front straight pipe section are lower.

5, the diameter range is wider than other types of flow meters, from a few millimeters to 3m. The forward and reverse bidirectional flow can be measured, and the pulsating flow can also be measured.

6. The electromagnetic flowmeter has a large measuring range, usually 20:1~50:1, and the optional flow range is wide. The full-scale liquid flow rate can be selected within 0.5~10m/s.

Naipu AF vertical froth pumps are of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. They have a vertical shaft configuration, and comprise a hopper, with vertical Bearing Assembly, and Type`NP-AH` pump wet-end. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casing liners and Impellers.

Typical Applications---

Minerals Flotation Processing

Handle Frothy Slurries

AF Vertical Froth Pump Showing Component

Main Part Number At The Drawing

1.Bearing
2.Bearing Assembly
3.Tank
4.Frame Plate
5.Cover Plate

Materials of Construction

LINERS

IMPELLERS

CASING

BASE

EXPELLER

EXPELLER RING

SHAFT SLEEVE

SEALS

Standard

Chrome Alloy
Natural Rubber

Chrome Alloy
Natural Rubber

SG Iron

SG Iron

Chrome Alloy
or
SG Iron

Chrome Alloy
or
SG Iron

SG Iron

Rubber
and
Nitrile

Options

Ferralium
Hastelloy C
316 SS
W151
Polyurethane
Neoprene
Butyl
Viton
Nitrile
EPDM
Hypalon

Ferralium
Hastelloy C
316 SS
W151
Polyurethane
Neoprene
Butyl
Nitrile
Hypalon

SG Iron
Various grades

MS
Fabricated
Cast Iron

NI Resist
Ferralium
Hastelloy C
Polyurethane
316 SS
W151

NI Resist
Ferralium
Hastelloy C
316 SS
Rubber
W151
Polyurethane
Neoprene
Butyl
Nitrile

EN56C
Ferralium
Hastelloy C
Titanium
316 SS
304 SS

Ceramic
Stellite
Chrome Oxide
Nordel
Neoprene
Viton

NP-AF Froth Pump SELECTION CHART

NP-AF FROTH PUMP PERFORMANCE PARAMETERS

Type	Allowable Mating Max. Power(Kw)	Clear Water Performance				Impeller
		Capacity/Q mÂ³/hr	Head/m	Speed/rpm	Max Efficiency/%	Impeller Diameter/mm
2QV-NP-AF	15	7.2-33	5-30	800-1800	45%	229
3QV-NP-AF	20	10-104	10-28	700-1500	55%	268
4RV-NP-AF	40	15-130	6-28	500-1050	55%	397
6SV-NP-AF	75	55-330	6-25	350-680	55%	560

AF Vertical Froth Pumps

Vertical Froth Pump, Froth Pump, Froth Slurry Pump, Centrifugal Froth Pump, Mining Pump, Foam Pump, Vertical Foam Pump

Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com

	LINERS	IMPELLERS	CASING	BASE	EXPELLER	EXPELLER RING	SHAFT SLEEVE	SEALS
Standard	Chrome Alloy Natural Rubber	Chrome Alloy Natural Rubber	SG Iron	SG Iron	Chrome Alloy or SG Iron	Chrome Alloy or SG Iron	SG Iron	Rubber and Nitrile
Options	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon	SG Iron Various grades	MS Fabricated Cast Iron	NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151	NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile	EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS	Ceramic Stellite Chrome Oxide Nordel Neoprene Viton