In 2014, China's economic growth slowed to 7.4%, 2.3 percentage points lower than the average growth rate over the past 30 years. Against this background, the World Bank’s expectations of China’s economic growth have also continued to slow. In April last year, the World Bank had predicted that China's economic growth rate in 2015 will reach 7.5%, and then lowered to 7.2% in October last year.
Although the predicted value of China’s economic growth was lowered again, the World Bank’s forecasted value is still higher than the 7% growth target set by China at the beginning of the year. The World Bank stressed in its report that as the growth model shifts from investment-driven to consumer-led, the main challenge for China is to implement reforms that are conducive to ensuring long-term sustainable growth. It is suggested that China's policy of promoting growth should focus on supporting structural restructuring.
Sudir Shetty, chief Asia Pacific chief economist of the World Bank, said that although there is a risk of slowdown in China's economic growth, there will be no sharp drop in the growth rate, and the overall economic development in China is still optimistic.
Looking around East Asia and the Pacific, the World Bank report points out that the economic growth of developing countries in East Asia and the Pacific region will slow down slightly this year. The latest World Bank forecast shows that developing economies in East Asia are forecast to increase by 6.7% in 2015 and 2016, which is a slight decrease from 6.9% in 2014.
“Although the growth in East Asia has slightly slowed down, the region’s contribution to global growth has still reached one-third, which is twice the combined contribution of all other developing regions.†The Bank’s Deputy Governor for East Asia and the Pacific “The drop in oil prices will stimulate domestic demand in most countries in the region and also provide an opportunity to advance fiscal reforms. These reforms can improve the competitiveness of East Asia and help the region to maintain the world economy,†Kossel von Tolsenberg said. Growth engine status."
Welding Machine Smoke Exhaust System
1. Product description:
Welding machine fume extraction system is a kind of dust and smoke extraction solution for automatic welding machines. It contains dust collector, ducts and suction room or hood.
2. Moland Product Series
Moland Portable Fume Extractor series contain of MLWF50, MLWF70, MLWF100, MLWF360, MLWF120, MLWF200, MLWF280-basic, MLWF280S, MLWF290, MLWF300, MLWF300A, MLWF350, MLWF350D, MLWF400, etc.
Except portable fume extractors, we also supply stationary fume extractors (MLWF350-dust bucket type, MLWF500-6T, MLWF500-6T dust bucket type, MLWF500-9T, MLWF800, MLWF800-dust bucket type, MLWF1000, MLWF1500, MLWF2000, MLWF3000, MLWF3500, MLWF4000). The electric control cabinet can be seperated from main equipment for convenient operation when the main equipment is placed outdoors.
Grinding dust extractors are our another dust extraction product series, which contain of downdraft table (MLWF100D, MLWF150D, MLWF200D, MLWF320-DM, MLWF180, MLWF380, MLWF480) and grinding cabinet (MLWF900). The grinding cabinet is usally equipped with telescopic or fixed grinding room, to form a semi-closed space to control dust and smoke spread. It also improves the filtration efficiency with low air volume and energy consumption.
3. R&D
In order to provide advanced products, our R&D department develops 3 to 5 new products every year, and irregularly improves the performance, appearance, and installation methods of existing products.
4. Certification
All our products are approved by CE, ISO9001, ISO14001, utility model patent, design patent, Program copyright, etc.
5. Exhibition
Moland participates at least 5 industry exhibitions each year.
6. Central Fume Extraction System
1) Cantilever type fume extraction system
Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the Suction Hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.
2) Hood suction type fume extraction system
Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the suction hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.
3) Room tupe fume extraction system
Room-type dust removal is suitable for the purification of fumes and smoke generated during the production of automated equipment, such as welding robots, welding machines, grinding, grinding and polishing of metal and plastic parts, drilling, thermal processing, cutting and crushing, stone processing, powder packaging, solid particles and various dusts and fumes produced by mixing and processing.
For working conditions such as robot automatic welding, circular seam and longitudinal seam welding, the smoke and dust purifier is installed with the robot workstation, so that the workstation has its own dust removal function. The fume and smoke are effectively collected through equipment components such as pipes and dust hoods. The room-type design prevents the volatilization and diffusion of smoke to keep the air in the workshop clean.
The working conditions with moderate welding workpieces and large amounts of dust and smoke are suitable for room-type treatment solutions. The room type centralized dust dedusting solution is divided into side suction and top suction method dust collecting ways. The appropriate solution can be designed according to the site conditions and treatment goals.
4) Blow suction type fume extraction system
Blow-suction type dust removal solution is a ventilation air flow composed of blown air and inhaled air flow. Therefore, it is a dust removal method that can effectively control the spread of pollution sources. This dust removal method is installing exhaust inlets on two-span center column or single-span side column (wall) and air outlets on the opposite wall column to form a circulating air flow to drive the smoke and dust into the purification machine, consequently performing overall dust removal and purification in the workshop. This system occupies a small area and has obvious purification effect, which is suitable for the purification of smoke and smoke in more complex production workshops.
7. Company information
Jinan Moland Environmental Tech Co., Ltd., is located in No. 11889 Jingshi West Road, Changqing District, Jinan City, Shandong, China, established in 2016. It`s an environmental protection technology enterprise specializing in research, development, manufacture and sale of efficient smoke purification systems.
The company is committed to reducing the environmental impact of production process, protecting workers from harmful gases and dust, and creating a cleaner working environment. At present, the company′s products have been successfully applied in automobile, railway, construction machinery, marine engineering, aviation and other mechanical processing industries, as well as new materials, grain, wood, recycled resources processing and other industries. The company has passed the ISO 9001 quality management system certification, obtained the certification of China Environmental Protection Products issued by China Environmental Protection Industry Association, and CE certification of EU. It also has a number of invention patents, utility model patents and appearance patents. Through continuous R&D and innovation, many products of the company have reached the international leading level.
Moland′s environmental services cover the whole process from project design, product manufacturing to installation, commissioning and after-sales service. We will provide you with the most professional governance program and the best quality service.
Welding Machine Smoke Exhaust System,Welding Fume Extractor,Welding Smoke Extractor,Welding Fume Purifier
Jinan Moland Environmental Tech Co.,Ltd , https://www.sdmoland.com