Standing Seam Metal Roof Machine

Model NO.: YX65-300
Working Material: Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll
Thickness: 0.5-1.0 mm
Yield Strength: 245-550MPa
Decoiler: Manual/Hydraulic for Options
Side Wall Thickness: 18mm
Shaft: 75mm/85mm
Forming Station: 14
Cutter Material: Cr12MOV, Heat Treatment
Feeding Material: 600±3mm
Housing: H450 Beam
Trademark: BMS
Transport Package: Naked and Covered by Plastic Film Into Container
Specification: about 7800*1500*1600mm
Origin: China (Mainland)
Model NO.: YX65-300
Working Material: Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll
Thickness: 0.5-1.0 mm
Yield Strength: 245-550MPa
Decoiler: Manual/Hydraulic for Options
Side Wall Thickness: 18mm
Shaft: 75mm/85mm
Forming Station: 14
Cutter Material: Cr12MOV, Heat Treatment
Feeding Material: 600±3mm
Housing: H450 Beam
Trademark: BMS
Transport Package: Naked and Covered by Plastic Film Into Container
Specification: about 7800*1500*1600mm
Origin: China (Mainland)

1.Main features of standing seam metal roof machine 
 

    The advantages of standing seam metal roof machine are as follows:

    1.Low cost, light weight but high strength, short building period, and re-cycle use

    2.Save material , no waste.

    3.Easy operation, low maintenance cost

 

2.Detailed Images of standing seam metal roof machine
 

    Machine Part

        1)  Standing seam metal roof machine feeding device

        Brand: BMS    Original: China

        With feeding material guide.

Standing Seam Metal Roof Machine

        2) Standing seam metal roof machine rollers 

        Brand: BMS    Original: China

        Rollers manufactured from high quality 45# steel, CNC lathes, Heat Treatment.

        with black treatment or Hard-Chrome Coating for options. 

        Body framemade from 350# H type steel by welding

Standing Seam Metal Roof Machine

        3) Standing seam metal roof machine post cutter

        Brand: BMS    Original: China

        Made by high quality mold steel Cr12 with heat treatment

        Cutter frame made from high quality 20mm steel plate by welding
        hydraulic motor:3.7KW, Hydraulic pressure range: 0-16Mpa

 

        4) Standing seam metal roof machine rollers profile drawing

        Brand: BMS    Original: China
Standing Seam Metal Roof Machine
 

        5)  Standing seam metal roof machine decoiler 

        Brand: BMS    Original: China

        ManualDecoiler: one set

        Un-powered,manually control steel coil inner bore shrinkage and stop

        Max. feeding width: 1200mm, coil ID range 508mm±30mm

        Capacity: 5-9 Ton

Standing Seam Metal Roof Machine
 

      

        With 6 tons hydraulic decoiler for option

Standing Seam Metal Roof Machine
 

Other detailes of standing seam metal roof machine 

Suitable for material with thickness 0.5-1.0mm

Shafts manufactured from 45#,Main shaft diameter=φ75mm,precision machined

Motor driving,Gear chain transmission, 14 steps to form.

Main motor=7.5KW , Frequency speed control. Forming speed approx.12-15m/min

PLC Control System (Touch screenbrand:German Schneider Electric/Taiwan WEINVIEW,

Inverter brand:Finland VOCAN/Taiwan DELTA/ALPHA,Encoder brand:Japan Koyo/OMRON)

Combined with: PLC, Inverter, TouchScreen, Encoder, etc

Cut-to-lengthtolerance≤±2 mm

Control Voltage 24V

User's manualin English

After-sale service of standing seam metal roof machine

1. The warranty of standing seam metal roof machine

    is one year after the client receives the machine. 

    Within the one year, we will courier the replacement parts to the client free of charge.

2. We offer technical support for the entire life of our machines.

3. We can send our technicians to install and train the workers in the clients' factories with extra cost.

Terms of trade

1. Minimum order quantity (MOQ): 1 piece

2. Delivery time: about 45 workdays

3. Port of loading: port of Xiamen

4. Type of payment: by T/T or by L/C

5. Export: Australia, UK, Ireland, Mexico, Brazil ,Israel ,Dubai, Russia ,India, Taiwan, Singapore, 

    Malaysia ,Thailand,  Philippines, Myanmar ,Vietnam, South Africa, Mozambique, 

    Zambia, Zimbabwe, Nigeria, Egypt, Sudan, etc. 

 

1.Main features of standing seam metal roof machine 
 

    The advantages of standing seam metal roof machine are as follows:

    1.Low cost, light weight but high strength, short building period, and re-cycle use

    2.Save material , no waste.

    3.Easy operation, low maintenance cost

 

2.Detailed Images of standing seam metal roof machine
 

    Machine Part

        1)  Standing seam metal roof machine feeding device

        Brand: BMS    Original: China

        With feeding material guide.

Standing Seam Metal Roof Machine

        2) Standing seam metal roof machine rollers 

        Brand: BMS    Original: China

        Rollers manufactured from high quality 45# steel, CNC lathes, Heat Treatment.

        with black treatment or Hard-Chrome Coating for options. 

        Body framemade from 350# H type steel by welding

Standing Seam Metal Roof Machine

        3) Standing seam metal roof machine post cutter

        Brand: BMS    Original: China

        Made by high quality mold steel Cr12 with heat treatment

        Cutter frame made from high quality 20mm steel plate by welding
        hydraulic motor:3.7KW, Hydraulic pressure range: 0-16Mpa

 

        4) Standing seam metal roof machine rollers profile drawing

        Brand: BMS    Original: China
Standing Seam Metal Roof Machine
 

        5)  Standing seam metal roof machine decoiler 

        Brand: BMS    Original: China

        ManualDecoiler: one set

        Un-powered,manually control steel coil inner bore shrinkage and stop

        Max. feeding width: 1200mm, coil ID range 508mm±30mm

        Capacity: 5-9 Ton

Standing Seam Metal Roof Machine
 

      

        With 6 tons hydraulic decoiler for option

Standing Seam Metal Roof Machine
 

Other detailes of standing seam metal roof machine 

Suitable for material with thickness 0.5-1.0mm

Shafts manufactured from 45#,Main shaft diameter=φ75mm,precision machined

Motor driving,Gear chain transmission, 14 steps to form.

Main motor=7.5KW , Frequency speed control. Forming speed approx.12-15m/min

PLC Control System (Touch screenbrand:German Schneider Electric/Taiwan WEINVIEW,

Inverter brand:Finland VOCAN/Taiwan DELTA/ALPHA,Encoder brand:Japan Koyo/OMRON)

Combined with: PLC, Inverter, TouchScreen, Encoder, etc

Cut-to-lengthtolerance≤±2 mm

Control Voltage 24V

User's manualin English

After-sale service of standing seam metal roof machine

1. The warranty of standing seam metal roof machine

    is one year after the client receives the machine. 

    Within the one year, we will courier the replacement parts to the client free of charge.

2. We offer technical support for the entire life of our machines.

3. We can send our technicians to install and train the workers in the clients' factories with extra cost.

Terms of trade

1. Minimum order quantity (MOQ): 1 piece

2. Delivery time: about 45 workdays

3. Port of loading: port of Xiamen

4. Type of payment: by T/T or by L/C

5. Export: Australia, UK, Ireland, Mexico, Brazil ,Israel ,Dubai, Russia ,India, Taiwan, Singapore, 

    Malaysia ,Thailand,  Philippines, Myanmar ,Vietnam, South Africa, Mozambique, 

    Zambia, Zimbabwe, Nigeria, Egypt, Sudan, etc. 

 

C/Z/U purline Molding Machine: this machine is for making the C/Z/U purline for the light steel strutures. C and Z steel purlins are necessary for the modern steel industrial buildings, and workshop as well, and various kinds of C/Z Purlin Roll Forming Machine have been developed to produce C/Z/U steel purlins. We also can make interchangeable c/z purlin roll forming machines and â„¦ shaped purline forming machine.

purline roll forming machine

C/Z/U purline Molding Machine

C Type Purlin Forming Machine,Z Type Purlin Forming Machine,Purlin Roll Forming,C Integrated Purlin Making Machine

Xianfa Roll Forming Machine Factory , http://www.btxianfa.com

Posted on