Be sure to pay attention to these matters before installing the smart lock.

Xiaobian often receives some consultation information that I want to replace the smart lock. It can be seen that the smart lock is getting more and more attention and favored by everyone. Moreover, it is necessary to change the mechanical lock to the smart lock. Said to everyone!
Before you replace the smart lock, you must consult carefully. Some details are very important and easy to ignore. Below we list some common issues.
1. Confirm the direction of opening the door
The first step is also a very important step, confirming the direction of opening the door, as shown below.


Open the door left: You stand on the outside of the door. When the fixed hinge of the door is on the left, the fingerprint lock is defined as the left open door, and the left inner push door and the left outer door open.
Right open door: You stand on the outside of the door. When the fixed hinge of the door is on the right side, the fingerprint lock is defined as the right open door, the right inner push open door and the right outer pull open door.
2. Is there a requirement for the material of the door to install the fingerprint lock?
There are many types of doors, there are metal doors for outdoor use, and wooden doors that are common indoors. You may worry that the wooden doors will not hold the fingerprint lock. In fact, this worry is superfluous. I have only seen thieves and shackles. Through the door! The Proba fingerprint lock can be installed on wooden doors, iron doors, copper doors, composite doors and security doors, with the exception of glass doors. Of course, you really can't worry about changing a security door and properly dropping it.
3, my home door is shuang open door to install two locks?
Strictly speaking, it is necessary to install two locks, one true lock and one fake lock. This is to facilitate the opening of the door, at the same time to achieve visually beautiful, symmetrical, will install a fake lock on the other door, (false lock refers to the same brand, the same type of lock, in order to install shuang open the door, and put one The lock cylinder and the lock tongue are removed, and only the outer shell is kept; commonly known as the fake lock.) The shuang door is mostly used by the villa, and the material is mostly metal, so the weight of the door will be heavier than the wooden door, in order to facilitate the opening of the door, before buying the lock Try to choose a fingerprint lock with a large handle.
4, the thickness of the door
The thickness of the door is an important factor that must be considered when installing a fingerprint lock. The thickness of the door determines the accessories of the lock. Generally, the door thickness corresponding to the smart lock is between 35mm and 100mm. The door thickness outside this range cannot be installed. Therefore, the thickness of the door must be measured at the time of purchase, so that the customer service staff can select the appropriate door lock for you.
5. Can I install it myself?
For those who love DIY, they will feel that installing the fingerprint lock is very simple, just follow the drawings and you can do it. However, if you are not familiar with the operation, some problems may occur and the lock may be damaged. If the lock caused by self-installation is damaged, it is impossible to enjoy the three-pack service. To be on the safe side, give this difficult task to a professional installer.
6. When the door was originally installed with a lock, there was a hole punching. Do you want to change the door?
This depends on the size of the previous lock hole. If the lock hole is too large, it needs to be replaced with a new one. Especially when the position of the new lock needs to be punched and overlaps with the old lock hole, the lock hole will affect the installation of the new lock.

Sanitary Ware

Bathroom Sanitary Ware, Stainless Steel Sanitary Ware, Traditional Sanitary Ware, Kitchen Sanitary Ware

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalve.com

Posted on