Industrial and commercial catering hotel canteen installed gas alarm program

The relevant provisions of the "Regulations on the installation of gas leakage safety protection devices in various gas-using units" are being drafted by relevant departments. All gas production and operation units and public service users such as restaurants, construction sites, hospitals, schools and canteens must install flammable gas. Alarms, then today I will explain how the flammable gas alarms in the hotel kitchen and school cafeteria are installed:

1. Installation position of flammable gas alarm: within a range of 1.5 meters from the gas source, the ventilation is good.

(1) Liquefied petroleum gas is denser than air, stays low after leakage, and the alarm should be installed about 0.5 meters away from the ground.

(2) The density of liquefied natural gas or gas is smaller than that of air, and it stays high after the leak. The alarm should be installed about 0.5 m from the ceiling.

2, can not install the location of the alarm: the corners, cabinets and other places where the air is not easy to circulate; easy to be directly smoked by the soot. The flammable gas leak alarm is suitable for a variety of flammable gas (liquefied gas) leaks, and the types are portable and fixed.

3. After one year of use, the alarm should be returned to the factory or to the local metrology institute for calibration, because the sensitivity of the built-in sensor will decrease after one year, and the detection error is large.

In accordance with relevant regulations, special supervision and inspection were carried out on the flammable gas alarms in the dining places in the jurisdiction. Focus on checking whether the user has implemented the relevant system, whether the accuracy of the damage device is correct, and whether the alarm device is operating normally. Article 28 of the Beijing Municipal Fire Protection Regulations stipulates that the operators of personnel-intensive places (including catering establishments) should install concentration detection and alarm devices in places where natural gas or liquefied petroleum gas is used.

Slurry Pump includes horizontal slurry pump, vertical slurry pump, submersible slurry pump, etc. For horizontal slurry pump, there are metal slurry pump and rubber lined slurry pump.

Horizontal Metal slurry pumps are cantilevered slurry pumps, Horizontal Centrifugal Slurry Pump, Centrifugal Pump Theory Slurry Pump, Heavy Duty Centrifugal Slurry Pump. They are designed for the handling highly abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The pumps of this type also may be installed in multistage series.
The frame plates have replaceable wear-resistant metal liners. The impellers are made of wear-resistant high chrome alloy .
Horizontal Metal slurry pumps may be adoptable of gland seal or expeller seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.

Rubber Lined Slurry Pumps and spare parts can fully interchange with world famous brand. These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and impellers, which are all interchangeable within a common costing assembly.

BV pumps are vertical, centrifugal slurry pumps submerged in sump to work. They are designed for delivering abrasive,large particle and high density slurries. These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type BV pump are made of abrasion-resistant metal. All parts of type BVR pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry.

ZQ(R) series of slurry pumps are hydraulic devices composed of coaxial motors and pumps that are submerged in the fluid to work. These pumps are characterized by unique structure wide passage, high capacity of removing sewage, and high quality materials, offering excellent corrosion resistance. They are suitable for transferring the liquid containing solid particles, like sand, coal slag, and tailings, and removing slurries in metallurgical plants,mines, steel mills, or power plants, as an ideal alternative to traditional pumps for taking away slurries

ZJ high head slurry pump high chrome alloy slurry pump CV DRIVE RUBBER SLURRY PUMP 3-2 rubber slurry pump

Centrifugal Slurry Pump

Slurry Pump,Centrifugal Slurry Pump,Horizontal Sludge Pump,Horizontal Centrifugal Slurry Pump,Centrifugal Pump Theory Slurry Pump,Heavy Duty Centrifugal Slurry Pump

Shijiazhuang Boda Industrial Pump Co., Ltd. , https://www.mineralslurrypump.com