Schneider promotes the use of time-sensitive networks as a unified solution for industrial IoT

[China Instrument Network Instrumentation Enterprise] Schneider Electric, ABB, Bosch Rexroth and other companies are jointly promoting the use of time-sensitive network (TSN) OPC UA as a unified solution for industrial controllers and cloud communications. The open standards-based solution will allow the industry to use devices from different vendors and maintain full interoperability, and plans to support OPC UA TSNs in next-generation products.

Traditionally, different industrial automation solutions are independent of each other because they use incompatible and non-interoperable differentiated standards for communication between devices. As a result, customers often find themselves locked in their own ecosystem. Manufacturers also have to develop multiple versions of the same product to support these ecosystems. This situation limits the integration of innovations and new solutions, and customers cannot optimize their automation solutions to their full value.
To solve this problem, Schneider Electric, ABB, Bosch Rexroth and others started an open technology collaboration under the framework of the Industrial Internet Alliance (IIC) and the OPC Foundation. These companies are committed to developing an open, unified, standards-based and interoperable Industrial Internet of Things (IIoT) solution for deterministic and real-time point-to-point communications between industrial controllers and the cloud. The organization considered the OPC UA TSN as a unified standard for industrial automation and IIoT connectivity. The OPC UA TSN combines the enhanced OPC UA pub/sub (Pub/Sub) technology and the IEEE TSN Ethernet standard. It provides all the open and standardized building blocks needed to unify industrial automation communications and will facilitate information technology (IT ) Widespread integration of operating technology (OT), which is the foundation for the realization of industrial IoT and Industry 4.0.
These companies plan to support OPC UA TSNs in the next generation of products. This type of pilot product has been integrated on an IIC test bench. The goal of these companies is to use OPC UA TSNs on a standard IT infrastructure to enable communication between compatible controllers on different vendors' devices.
(Original title: Schneider Electric promotes OPC UA as a unified standard for industrial IoT)

Concrete Pole Mould 

Length: 6m-18m

Top diameter: 150mm-230mm/by buyer

Taper: 1:75/by buyer

Advantage: high quality, easy operation

Pre-stressed concrete pole mould is used for electronic concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.

In order to form concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.

Our factory produces two categories of Pre-stressed concrete pole steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this series equipment comply with the China Standard JC/T364-2001.

Concrete pole mould

Features:

1. Welding technology, which enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.

2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the Steel Mould,

3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.

SPC concrete pole mould


The Technical parameter:

Inside Diameter(mm)

Wheel Distance(mm)

Wheel Diameter (mm)

Length(mm)

Ø100

2000

Ø600

6-7

Ø110

2000

Ø600

6-7

Ø120

2000

Ø600

6-8

Ø130

2000

Ø600

6-8

Ø150

2000

Ø600

6-10

Ø170

2000

Ø600

6-12

Ø190

2000

Ø600

7-12

Ø190

2000

Ø650

15-18

Ø230

2000

Ø650

6-9

Ø310

2000

Ø650

6-9

Ø350

2000

Ø680

6-9

Ø390

2000

Ø750

6-9

concrete pole

 SPC concrete pole bending test


SPC Pole Mould

Centrifugal Machine,Spun Prestressed Pole Mould ,Spc Pole Mould,Spc Pole Mould In Bangladesh

Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com

Posted on