In 2013, the lighting LED packaging market will be dominated by low- and medium-power products. From the LED packaging market, LED lighting costs have fallen sharply due to changes in LED specifications. In the past, most lighting applications were the world of high-power LEDs. However, since Samsung and LG introduced the medium-power LEDs of the 5630 package to the lighting market, the price of LED lighting products has more room to fall.
Since the high-power LED per unit lumen/price (lm/$) is still not as competitive as the low- and medium-power LEDs such as the 3014 and 5630 packages, the production capacity of low- and medium-power backlight LEDs has been transferred to lighting applications in this situation. Next, the price competition in the LED lighting market will be even more intense in 2013. In particular, LED manufacturers have overcapacity. In order to increase the utilization rate, upstream manufacturers will continue to increase production of low- and medium-power LED packages into the lighting market, while low-to-medium power still has 20 price cuts in 2013. Therefore, the medium and low power LED wafer products in 2013 will still be the main specifications in the market of LED bulbs and LED tubes with fierce price competition.
In 2013, the target and actual ratio of penetration rate of LED terminal products increased greatly. From the LED lighting market of the terminal, according to the 2013 LED industry outlook analysis report, the energy-saving demand brought by the earthquake in 2011 greatly increased the electricity saving of the Japanese people. Awareness, therefore, the awareness and purchase intention of LED products are higher than other countries, and the price of LEDs is greatly reduced, which promotes the development of LED lighting products in Japan by local lighting manufacturers in 2012, and observes the development of LEDs by major global manufacturers. In terms of products, global LED lighting has a penetration rate of 17.6 compared to traditional lighting production. However, Japanese lighting manufacturers have an average penetration rate of 30 to 50 for LED products, and some manufacturers even reach 70 to 90 levels.
Although Japanese LED bulbs doubled in shipments in 2011, mainly due to the increased awareness of power saving, the popularity of LED bulbs in the general family is advanced. In addition, LEDs with a longer life than incandescent bulbs, if they are in the home, have an average of 50 hours of electricity per week, and LED lamps that are known for 40,000 hours of life will not be replaced for 10 years. Therefore, it is estimated that the Japanese market will only grow slightly to 29.5 million units (2.6YoY) in 2012. It was replaced by the development of the tube and high value-added lamps in the second half of 2012 and 2013.
From the perspective of the US lighting market, in 2012, local hydropower companies made rebate solutions for LED bulbs, lamps and lighting products, and the products were qualified by EnergyStar or DesignLightConsortium. Through rebates, consumers increase the incentive to retrofit and replace new equipment to provide better results and comfort while reducing energy use. Since 2012, LED commercial lighting suppliers have increased, resulting in a significant drop in prices, coupled with the growth of commercial buildings in 2012, including office buildings, stores, warehouses and hotels, and increased demand for LED commercial lighting. On the other hand, the luminaire design alliance has set specifications and requirements for 4 mile lamps, in response to the rise of the LED commercial lighting market, perhaps the United States has the opportunity to replace Japan as the next major market for LED lighting.
1. Introduction of Lever Chain Hoist VL Series/Vital Rachet Chain Hoist
1) Capacity from 0.25T to
6T, Minimum headroom required and very versatile in operation
2) Automatic double-pawl braking system
3) Chain guides provide smooth chain operation
4) Roller bearing supported load sheaves for avoiding abrasion
5) G80 Chain are made of special alloy steel that is exclusively
6) Drop forged kooks to ensure superior quallity and safety
7) The Lever Hoist static test is 4 times of capacity, and running test is 1.5
times of capacit one by one
8) The Lever Block is of high efficiency, fast lifting and light hand pull.
9) Surface finishing: Automotive painting.
|
Model |
Unit |
VL 3/4 |
VL1-1/2 |
VL3 |
VL6 |
|
Capacity |
T |
0.75 |
1.5 |
3 |
6 |
|
Lifting height |
M |
1.5 |
1.5 |
1.5 |
1.5 |
|
Min.distance between hooks |
Mm |
295 |
335 |
405 |
550 |
|
Full load hand force |
Kgf |
15 |
18 |
38 |
39 |
|
No.of load chain fall lines |
|
1 |
1 |
1 |
2 |
|
Diameter of load chain |
Mm |
6.3 |
7.1 |
9 |
9 |
|
Net weight |
Kg |
6.9 |
9.7 |
16.3 |
26.7 |
VITAL Type Lever Hoist
VITAL Type Lever Hoist,VITAL Manual Lever Hoist,VITAL Type Lever Chain Block,Manual Lever Pulley Hoist
Hebei Lihua Hoisting Machinery Manufacturing Co., Ltd , http://www.lhqzhoisting.com