Belt theory

Belt theory

High-precision electronic belt weighers are installed on belt conveyors with a relatively small inclination angle (≤10 degrees) and use full-suspension weighing bridges. This type of bridge has no fulcrum and movable parts. The long-term of this type of electronic belt weigher Stability and weighing accuracy are unmatched by other electronic belt scales.

High-precision electronic belt scale weighing bridge

1 、Full suspension structure, no trunnion fulcrum and movable parts, low maintenance;

2 , the unit component structure, less force transmission ease, installation is simple and convenient;

3 , a unique rectangular lever, good rigidity, no distortion, zero stability;

4 , anti-lateral resistance, horizontal force, effectively reducing the belt deviation and blanking deviation on the system accuracy;

5 、Four weighing sensors, which are subject to small side effects, balance, and high measurement accuracy;

6 , a wide range of weighing, three or four groups of rollers to minimize the impact of the belt on the weighing accuracy;

7. For special occasions where the dust is large and corrosive such as acid, alkali and salt, the scale rack can be made of stainless steel or subjected to anti-corrosion treatment.

High-precision electronic belt scale weighing controller

1 , comprehensive accuracy: ± 0.01c / o;

2. The display is a four-line LCD/fluorescent display showing the instantaneous flow rate, cumulative amount, belt conveyor operating parameters

3 , scroll menu, can be used for parameter input, set Chinese display, simple operation;

4 , a variety of calibration methods, can automatically adjust the zero and interval, automatic zero tracking;

5 , remote counting adopts non-contact form, output AC or DC signal;

6 , current output interface (optional): output can be proportional to the flow of 0 ~ 20mA or 4 ~ 20mA current;

7 , communication interface (optional): standard RS232C, RS485C interface;

8 , can set the flow: PID adjustment function, to achieve ingredients control;

9 , print interface (printer optional): parallel printer;

10 , instrument structure: There are embedded and wall-mounted two, to meet the different requirements of a variety of sites.

High-precision electronic belt weigher main technical parameters

System Accuracy: ±0.125%

Weighing range:0~8000t/h

Belt width: 500 to 2400mm

Belt speed: 0~4m/s

Belt conveying angle: 0 ~ 10°

Remote data transmission: 1200m

This article comes from Shanghai Qinjing Industrial Co., Ltd. and would like to know more about the principle of belt scales. Welcome to visit Shanghai Qinken Industrial Co., Ltd., please indicate the source.


Servo feeder machine is one type smart and easy to operate feeder machine in the market. It can feed metal strips thickness up to 6.0mm and Max. Feeding speed reaches 30m/min.

Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan, it can ensure +/-0.01mm high feeding precision.It is very important to precisely measure the feeding length of the sheet during sheet metal processing and length cutting, and when dealing with press.
This precision can only be achieved with a motor with a precise turning interval, such as a servo motor. We manufacture high-precision drivers by utilizing the capabilities of high-resolution servo motors. We design our machines according to the quality, width, and thickness of the materials you will be processing.

Directly input the 20 difference feeding length on the control display screen and then it can reach needed feeding length, the Max. Feeding length is 9999.99mm.

Usually Nc Servo Feeder matches with adjustment signal from the cutting machine or Power Press Machine.With two different release type, pneumatic release and mechanical release.


Servo Roll Feeder

NC Servo Roll Feeder,Nc Servo Roll Sheet Feeder,Servo Roller Feeder,Nc Servo Feeder,NC Servo,Coil Feeders

Mayflay Machinery(huizhou) Co.,LTD , http://www.pressfeeders.com

Posted on