The Kane County Chronicle recently published an article discussing a potential expansion of the Fox River and Countryside Fire/Rescue District, which could come at the expense of the Elburn and Countryside Fire Protection District. According to court documents dated July 17, local voters have submitted a petition to remove certain land from the Elburn and Countryside district and assign it to the Fox River district.
Pat Griffin, an attorney representing the Fox River district, explained that the proposed territory is bordered by LaFox Road to the east, Anderson Road to the west, Campton Hills Road to the south, and Empire Road to the north. However, some agricultural land just north of Silver Glen Road is also included in the area under consideration.
Griffin noted that approximately 128 people signed the petition, but the population in the affected area is estimated to be around 3,000. The petition serves as a way for residents to bring the issue before voters on the November 4 ballot. A judge must review the petition and assess several key factors, including whether the new territory would receive equivalent fire services from the Fox River district and whether the disconnection would significantly harm the Elburn district.
Kane County Circuit Judge David Akemann concluded last week, based on a document dated August 28, that the conditions for the transfer and disconnection were met. However, the Elburn Fire Protection District has raised concerns about the financial impact, arguing that there was little evidence presented regarding how the disconnection would affect their expenditures.
Only residents within the specific territory will be eligible to vote on the matter, and a simple majority is required for the process to move forward. The referendum will be discussed during a special board meeting of the Fox River district on September 3 at 7 p.m.
The two questions on the ballot are:
1. For making the transfer from the Elburn and Countryside Fire Protection District to the Fox River and Countryside Fire/Rescue District, remaining liable for a proportionate share of the bonded indebtedness outstanding as of the date of disconnection, if any, of the district from which disconnection is proposed, and also assuming a proportionate share of the bonded indebtedness, if any, of the district to which transfer is proposed.
2. Against making the transfer from the Elburn and Countryside Fire Protection District to the Fox River and Countryside Fire/Rescue District, remaining liable for a proportionate share of the bonded indebtedness outstanding as of the date of disconnection, if any, of the district from which disconnection is proposed, and also assuming a proportionate share of the bonded indebtedness, if any, of the district to which transfer is proposed.
Thanks, Dan.
Water Chiller System
Introduction to GENT water chiller system series
The products under GENT water chiller system series are mainly water chillers that can produce cold water or realize indoor space cooling, that is, the produces under this category are mainly used to meet users’ demand of cooling.
There are many units under this category, and these units all belong to the chiller series, but each has its own difference and characteristic. Users can choose the right unit according to your needs.
Commonalities of several units
The output form of these chiller is cold water. The cold water produced by these units can directly meet the users’ need of cold water. As for the users with the need of indoor space cooling, you need to equip the water chiller with matching indoor terminals to realize the heat exchange between the cold water and indoor air so as to realize indoor space cooling.
Differences among several units
The biggest difference between these units is the different cooling source used by them. Among them, the Cold Plunge Water Chiller and air cooled chiller use air as the cooling source, water cooled chiller uses natural water at normal temperature or cooling equipment as the cooling source, Evaporative Water Chiller uses the tap water that is cooled after evaporation through the wet certain as the cooling source. The different cooling sources used by these units make it necessary for users to determine what kind of cooling source is available before choose the unit, so as to ensure the unit can operate normally once it is in place.
The above categories are mostly distinguished according to their respective characteristics, and the products under each category are the same products with different modes. In contrast, the industrial chiller category is distinguished according to the usage scenario, which means that the chiller can be used in industrial scenario, and the products under this category are not limited to a certain product. Under normal circumstances, all chillers can be classified under this category, because all chillers can be used in industrial scenario.
Therefore, there are several chillers for users to choose, and these units all have its own difference and characteristic, users can definitely choose the chiller system that best suit you.
Water Cooled Chiller,Water Cooled Chiller System,Industrial Chiller,Chiller System,Air Cooled Chiller
GUANGZHOU GENT NEW ENERGY TECHNOLOGY CO., LTD , https://www.gentgz.com