1, from the driving school will eventually get a driver's license, both happy and more nervous. Because after leaving the coach's embarrassment, when a person faced the passing population and the vehicle, he encountered a lot of situations and he would step on the emergency brake. When there is an emergency, the example of using the accelerator as the brake pedal is also the most For a long time, this is why so many new drivers have created so many rear-end accidents.
When a new driver drives a commercial vehicle, he or she will keep the distance between the vehicles at a certain time. If driving on to those more complicated road conditions, remember not to panic and must control the vehicle speed. When you need to step on the brakes, don't step on it tightly, be sure to gently, so that you can give reaction time to the rear of the vehicle. When driving a commercial vehicle at ordinary times, it is necessary to habitually exercise some of the driving vehicles called up postures, so that the correct operating modes can be reflected on the legs conditionally, and the throttles can be greatly reduced. In the traffic accident in the brake pedal.
2. Most of the new drivers will habitually turn to look at the rear when driving a commercial vehicle. However, they do not make good use of the rearview mirror to view some of the conditions behind the road. I have even seen some new players. The driver does not apply after the time. At the time of parking or when it was necessary to start, the turn signal was not turned on. This would not have caused a traffic accident.
When a new driver is driving a commercial vehicle, he must develop a good habit of using rearview mirrors to view road conditions. Although no matter what the rearview mirror of the car is, there is a blind spot on the perspective, but the use of the rearview mirror is better than nothing. When looking at the rearview mirror, you can quickly see some of the things behind the windows of the business vehicle, so that you can determine what you need to do next.
3, most of the new drivers because of the operation is relatively unfamiliar, or often forget the Panasonic handbrake, and some of the misuse, when waiting for the red light, often have encountered a sudden start to the fire situation. At this time, the rear vehicles will begin to slog their horns. It is easy for the novice commercial vehicle driver to become more confused and more likely to make more mistakes.
When a novice driver waits for a red light, he observes the red light for a long time. If the time is not very long, it may not be possible to pull down the handbrake. You can step on the brake and wait. After waiting for the red light to arrive, you can gently loosen the brakes and make a smooth and steady refueling. Then you can start very smoothly.
Located In the northwest of China, Xibei Bearing Co., Ltd. orientate to equip toChinaand service to the world. During the course of development, Xibei Bearing Co., Ltd. continuously accumulates experience, pioneering and innovative, forge ahead with determination. In accordance with the international standard and customer`s special requirement, Xibei Bearing can produce more than 6000 varieties of bearing standard and non-standard with outside diameter from40mmto3500mm. Its products are widely used in rail transit, military industry, precision motor, petroleum machinery, metallurgy machinery, heavy truck, construction machinery, mining machinery, cement machinery and hydraulic engineering, etc. Its products are well sold all overChinaand export to over 50 countries and regions, such as Europe,America, Asia,Africa, etc.
Hydraulic Engineering Bearing
Hydraulic Engineering Bearing,Thrust Bearing,Sleeve Bearing,Needle Bearing
Xibei Bearing Co.,Ltd. , https://www.nxzjck.com