I have encountered several different roads in Australia and I will come here one by one.
(1) Motorway or Highway M, which is the highest-level road, similar to our highway, most of which are free of charge. Only Sydney, Melbourne and Brisbane have a small number of toll roads, of which the toll roads are mainly in Sydney. The toll gate is divided into cash Cash, E-tag and E-pass. The cash is also divided into two types: changeable and non-existent. There are no electronic payment devices for the rented vehicles. Therefore, it is necessary to advance the line to the cash. mouth. In addition, please pay special attention to Melbourne's citylink and Sydney's Lane Cove Tunnel to North Sydney, M7, Cross City Tunnel, Harbour Tunnel and Facon Street exit. If you want to take these routes without installing the E-tag, you can call the day pass one day in advance or in the next three days. The phone number is not the same for different routes. Ask questions when renting a car. You can also commission a car rental company to buy a good day pass.
(2) freeway, This refers to highways without traffic lights, a slightly lower level than motorway, and the condition of the road surface is very good, basically similar to our highway. Although there is no traffic light, there will be intersections. There will be a reminder sign a long distance ahead of time, and a little attention will be paid.
(3)highway, similar to our provincial highway, with traffic lights, usually 2 lanes.
(4) The roads at the beginning of A, B, and C feel one level lower than our provincial highway, usually just one lane, and there will be a 300-meter-long overtaking lane every few kilometers. There are few gas stations along the roads (1) and (4), which are usually separated by tens of kilometers. There are many roads (2) and (3), especially when passing through towns, the gas stations are more concentrated. A certain number of Australian roads may consist of many roads with different road names, so you should pay more attention to the road number, not the specific road name.
Computer Numeric Control (CNC) is the automation of machine tools that are operated by precisely programmed commands encoded on a storage medium (computer command module, usually located on the device, see picture right-->) as opposed to controlled manually by hand wheels or levers, or mechanically automated by cams alone. Most NC today is computer (or computerized) numerical control (CNC), in which computers play an integral part of the control.
We develop the Cnc Stainless Steel Parts
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high-salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal's internal structure. Passivation occurs only if the proportion of chromium is high enough and oxygen is present.
B. Main particulars
|
|
MAIN PARTICULARS |
|
Material |
Stainless steel(201,304,316-) |
|
Standard |
ASTM, ASME, DIN, JIS, ISO, BS, API, EN |
|
Certificate |
ISO9001 |
|
Tolerance |
Up to +/- 0.002mm |
|
Dimension |
As per drawing, as large as we can |
|
Processing |
CNC turning, CNC turning and milling compound processing, 3/4/5 axis CNC machining center, wire-cutting, EDM, grinding etc. |
|
Finishing surface |
Machined surface with oil, blasting and painting, anodize, polishing, powder painting, electrophoretic coating- |
|
Marking |
as per clients` requirements |
|
Inspection |
material, construction, dimension, heat treatment, hardness, NDT |
|
Quality |
ISO9001, PPAP control production |
|
Lead time |
3-20 days for sample, consult with customer for mass production |
|
Delivery |
Express for sample, ocean shipping/air for mass production |
|
Our Capabilities |
CNC machining, CNC center machining, drilling, milling, turning, grinding, tapping, boring |
|
Engineering & manufacturing services |
R&D process, tooling and gauging design, product design Integrated CAD/CAM system, test and measuring |
|
Others |
Recyclable, in line with environmental requirements and standards, and reliable |
C. Construction
Construction by machining
D Workmanship
The workmanship have good production practice. Care are taken to ensure High accuracy and smooth surfaces
E. Certificates
- Material certificates
- Measuring reports
- Inspection protocol
- NDT reports
- Fixed certificate: ISO9001 certificate
Our service
Besides above the general specifications, we can also supply some specific machining parts as clients' requirements.
Package and shipping
Export cartons, pallets, wooden cases, Polybags
container package and container transportation
Steel Machining Parts,Precision Cnc Metal Machining,Stainless Steel Machine Parts,Cnc Metal Machining
Shinvast Industry Ltd , http://www.shinvastindustry.com